Submit your question using the contact form below to request a new article.

    Alternatively, Log a Service Request for assistance from our Customer Support Team.


    Install & Configure the RMS Print Client

    Installation guide for the RMS Print Client


    Steps Required

    Have your System Administrator complete the following.

    1. Go to Setup > Print Profiles in RMS.
    2. Select 'Download'.
    3. Open the downloaded 'RMSSmartPrintClient' file.
      1. Select 'Run Anyway' if prompted by Windows.
      2. Select 'Yes' if prompted by Windows to allow the program to make changes to the PC.
    4. Follow the Installer Prompts.
      1. Select 'Everyone' for Install the RMS Print Client for.
    5. Open the installed RMS Smart Print Client.
    6. Enter the Property's RMS Client ID & Webservices Password.
    7. Select 'List Properties'.
    8. Select the checkbox for each Property using this network of printers.
    9. Select 'List Printers'
    10. Select the checkbox for each Printer to be used in RMS.
    11. Enter a Description for this RMS Print Client.
    12. Select 'Ok' to complete configuration.

    Info

    The RMS Print Client must be installed on a PC with Windows 7 or later as the operating system.

    Only one Print Client per network of printers is required.

    Visual Guide

    Go to Setup > Print Profiles in RMS.

    Select 'Download'.

    Open the downloaded 'RMSSmartPrintClient' file.

    Select 'Run Anyway' if prompted by Windows.

    Select 'Yes' if prompted by Windows to allow the program to make changes to the PC.


    Follow the Installer Prompts.

    Select 'Everyone' for Install the RMS Print Client for.

    Open the installed RMS Smart Print Client.

    Enter the Property's RMS Client ID & Webservices Password.

    Select 'List Properties'.

    Select the checkbox for each Property using this network of printers.

    Select 'List Printers'.

    Select the checkbox for each Printer to be used in RMS.

    Enter a Description for this RMS Print Client.

    Select 'Ok' to complete configuration.



    Was this article helpful?

    Send Feedback

    Can’t find what you’re looking for?

    Our team of RMS experts are here for you!

    Submit a Question